If you didn’t download already and run thru command to flash the clean vbmeta you can do it by turning off the phone, using a autobooter.py or.exe (Linux or windows) when the phone is off and then plug in the phone. That should get you to fastboot mode where you can flash vbmeta. You can find those autobooters somewhere on the forums
Will this one work?
Think so, but then you’ll have to flash @dfrydman super for gapps
1 Like
K will do tomorrow. Or can’t I use mtkclient? (Lol I love termux 
)
You can, but I won’t answer you when you soft brick 
I’m sure you can
1 Like
Without your help for bricks I think I’m better off waiting for tomorrow…
1 Like
You have a link with instructions?
Go on dietdroid.com I believe he has the autobooter.exe and just turn the phone off and connect it will automatically boot into fastboot then flash the vbmeta
Download the 3.0.2 no gapps patched @ars18 uploaded and flash that with SP flash tool then use autoboter to flash the vbmeta then it should boot properly
@flipphoneguy @anurmalamentch Here is a guide how I got Gapps on the new qin 3.0.2 thanks to @dfrydman @ars18
- Start by unlocking the bootloader
- then using SP Flash Tool and flash this (download only)
https://github.com/alltechdev/awesome-qin-f21-pro/releases/download/v3/3-PATCHED-NO_GAPPS-F21Pro_CY_20251027_1800_v3.0.2.rar - After done do not turn on the phone disconnect from the computer run autobooter.exe
https://drive.google.com/file/d/1n1xr_582M5MV5RTtNqPAZefcNy8VSlLL/view?usp=sharing
and connect the device which will boot directly to fastboot - Flash this vbmeta https://github.com/alltechdev/awesome-qin-f21-pro/releases/download/v3/vbmeta.bin using the command
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.bin
- Then flash the Super with Gapps from @dfrydman https://drive.google.com/file/d/1vnlAm9XvL5XnS1zVirSKERQs3LZLGSIa/view
fastboot flash super super.img
If you want to remove the orange state warning flash this lk_a
https://drive.google.com/file/d/1kEhQB6OcP-KeTV_6dON4vC8xpIiz75IV/view?usp=sharing
fastboot flash lk_a lk_a.bin
- Reboot (first boot will take a few minutes) make sure date, time and time zone are correct for Gapps to work properly
P.S. NO US Bands available yet for this build
5 Likes
Thanks @Nooch
Please add to guide, and let me know if you want me to transfer the GitHub repo over to you.
I’d love to say I’ll get to it, but qins are low on my list now.
Can also just try putting @dfrydman super into spflash package.
@flipphoneguy worked out?
Will report when I do it. My laptop is at my bros house. Can’t get through to him meanwhile.
1 Like
Will add
Probably can just wanted to keep it simple (when I updated the guide yesterday I wrote to do like that) hopefully will have time to pull a full back with a scatter in the next couple days
Check out my edits on the guide so far
1 Like
Nice!
I removed the services.jar patch for “all versions” because it’s not accurate.
1 Like
Success!!
Great thanks to @ars18 @dfrydman and @Nooch!!
@Nooch maybe add to your guide regarding lk_a to flash in fastboot and not fastbootd (since the user is in fastbootd at that point after flashing super)
3 Likes
I was in Fastboot after flashing super not fastbootd why were you in fastbootd ?
O well usually you flash super from fastbootd. That’s what I did and then I went back to fastboot for lk_a but if fastboot worked for you I guess that also works
Added
1 Like
U da man
Do I need to press anything on the phone when running autobooter? Nothing is happening.